File "StreamSelectLoop.php"
Full Path: /home/fundopuh/trader.fxex.org/vendor/react/event-loop/src/StreamSelectLoop.php
File size: 11.76 KB
MIME-type: text/x-php
Charset: utf-8
<?php
namespace React\EventLoop;
use React\EventLoop\Tick\FutureTickQueue;
use React\EventLoop\Timer\Timer;
use React\EventLoop\Timer\Timers;
/**
* A `stream_select()` based event loop.
*
* This uses the [`stream_select()`](https://www.php.net/manual/en/function.stream-select.php)
* function and is the only implementation that works out of the box with PHP.
*
* This event loop works out of the box on PHP 5.4 through PHP 8+ and HHVM.
* This means that no installation is required and this library works on all
* platforms and supported PHP versions.
* Accordingly, the [`Loop` class](#loop) and the deprecated [`Factory`](#factory)
* will use this event loop by default if you do not install any of the event loop
* extensions listed below.
*
* Under the hood, it does a simple `select` system call.
* This system call is limited to the maximum file descriptor number of
* `FD_SETSIZE` (platform dependent, commonly 1024) and scales with `O(m)`
* (`m` being the maximum file descriptor number passed).
* This means that you may run into issues when handling thousands of streams
* concurrently and you may want to look into using one of the alternative
* event loop implementations listed below in this case.
* If your use case is among the many common use cases that involve handling only
* dozens or a few hundred streams at once, then this event loop implementation
* performs really well.
*
* If you want to use signal handling (see also [`addSignal()`](#addsignal) below),
* this event loop implementation requires `ext-pcntl`.
* This extension is only available for Unix-like platforms and does not support
* Windows.
* It is commonly installed as part of many PHP distributions.
* If this extension is missing (or you're running on Windows), signal handling is
* not supported and throws a `BadMethodCallException` instead.
*
* This event loop is known to rely on wall-clock time to schedule future timers
* when using any version before PHP 7.3, because a monotonic time source is
* only available as of PHP 7.3 (`hrtime()`).
* While this does not affect many common use cases, this is an important
* distinction for programs that rely on a high time precision or on systems
* that are subject to discontinuous time adjustments (time jumps).
* This means that if you schedule a timer to trigger in 30s on PHP < 7.3 and
* then adjust your system time forward by 20s, the timer may trigger in 10s.
* See also [`addTimer()`](#addtimer) for more details.
*
* @link https://www.php.net/manual/en/function.stream-select.php
*/
final class StreamSelectLoop implements LoopInterface
{
/** @internal */
const MICROSECONDS_PER_SECOND = 1000000;
private $futureTickQueue;
private $timers;
private $readStreams = array();
private $readListeners = array();
private $writeStreams = array();
private $writeListeners = array();
private $running;
private $pcntl = false;
private $pcntlPoll = false;
private $signals;
public function __construct()
{
$this->futureTickQueue = new FutureTickQueue();
$this->timers = new Timers();
$this->pcntl = \function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch');
$this->pcntlPoll = $this->pcntl && !\function_exists('pcntl_async_signals');
$this->signals = new SignalsHandler();
// prefer async signals if available (PHP 7.1+) or fall back to dispatching on each tick
if ($this->pcntl && !$this->pcntlPoll) {
\pcntl_async_signals(true);
}
}
public function addReadStream($stream, $listener)
{
$key = (int) $stream;
if (!isset($this->readStreams[$key])) {
$this->readStreams[$key] = $stream;
$this->readListeners[$key] = $listener;
}
}
public function addWriteStream($stream, $listener)
{
$key = (int) $stream;
if (!isset($this->writeStreams[$key])) {
$this->writeStreams[$key] = $stream;
$this->writeListeners[$key] = $listener;
}
}
public function removeReadStream($stream)
{
$key = (int) $stream;
unset(
$this->readStreams[$key],
$this->readListeners[$key]
);
}
public function removeWriteStream($stream)
{
$key = (int) $stream;
unset(
$this->writeStreams[$key],
$this->writeListeners[$key]
);
}
public function addTimer($interval, $callback)
{
$timer = new Timer($interval, $callback, false);
$this->timers->add($timer);
return $timer;
}
public function addPeriodicTimer($interval, $callback)
{
$timer = new Timer($interval, $callback, true);
$this->timers->add($timer);
return $timer;
}
public function cancelTimer(TimerInterface $timer)
{
$this->timers->cancel($timer);
}
public function futureTick($listener)
{
$this->futureTickQueue->add($listener);
}
public function addSignal($signal, $listener)
{
if ($this->pcntl === false) {
throw new \BadMethodCallException('Event loop feature "signals" isn\'t supported by the "StreamSelectLoop"');
}
$first = $this->signals->count($signal) === 0;
$this->signals->add($signal, $listener);
if ($first) {
\pcntl_signal($signal, array($this->signals, 'call'));
}
}
public function removeSignal($signal, $listener)
{
if (!$this->signals->count($signal)) {
return;
}
$this->signals->remove($signal, $listener);
if ($this->signals->count($signal) === 0) {
\pcntl_signal($signal, \SIG_DFL);
}
}
public function run()
{
$this->running = true;
while ($this->running) {
$this->futureTickQueue->tick();
$this->timers->tick();
// Future-tick queue has pending callbacks ...
if (!$this->running || !$this->futureTickQueue->isEmpty()) {
$timeout = 0;
// There is a pending timer, only block until it is due ...
} elseif ($scheduledAt = $this->timers->getFirst()) {
$timeout = $scheduledAt - $this->timers->getTime();
if ($timeout < 0) {
$timeout = 0;
} else {
// Convert float seconds to int microseconds.
// Ensure we do not exceed maximum integer size, which may
// cause the loop to tick once every ~35min on 32bit systems.
$timeout *= self::MICROSECONDS_PER_SECOND;
$timeout = $timeout > \PHP_INT_MAX ? \PHP_INT_MAX : (int)$timeout;
}
// The only possible event is stream or signal activity, so wait forever ...
} elseif ($this->readStreams || $this->writeStreams || !$this->signals->isEmpty()) {
$timeout = null;
// There's nothing left to do ...
} else {
break;
}
$this->waitForStreamActivity($timeout);
}
}
public function stop()
{
$this->running = false;
}
/**
* Wait/check for stream activity, or until the next timer is due.
*
* @param integer|null $timeout Activity timeout in microseconds, or null to wait forever.
*/
private function waitForStreamActivity($timeout)
{
$read = $this->readStreams;
$write = $this->writeStreams;
$available = $this->streamSelect($read, $write, $timeout);
if ($this->pcntlPoll) {
\pcntl_signal_dispatch();
}
if (false === $available) {
// if a system call has been interrupted,
// we cannot rely on it's outcome
return;
}
foreach ($read as $stream) {
$key = (int) $stream;
if (isset($this->readListeners[$key])) {
\call_user_func($this->readListeners[$key], $stream);
}
}
foreach ($write as $stream) {
$key = (int) $stream;
if (isset($this->writeListeners[$key])) {
\call_user_func($this->writeListeners[$key], $stream);
}
}
}
/**
* Emulate a stream_select() implementation that does not break when passed
* empty stream arrays.
*
* @param array $read An array of read streams to select upon.
* @param array $write An array of write streams to select upon.
* @param int|null $timeout Activity timeout in microseconds, or null to wait forever.
*
* @return int|false The total number of streams that are ready for read/write.
* Can return false if stream_select() is interrupted by a signal.
*/
private function streamSelect(array &$read, array &$write, $timeout)
{
if ($read || $write) {
// We do not usually use or expose the `exceptfds` parameter passed to the underlying `select`.
// However, Windows does not report failed connection attempts in `writefds` passed to `select` like most other platforms.
// Instead, it uses `writefds` only for successful connection attempts and `exceptfds` for failed connection attempts.
// We work around this by adding all sockets that look like a pending connection attempt to `exceptfds` automatically on Windows and merge it back later.
// This ensures the public API matches other loop implementations across all platforms (see also test suite or rather test matrix).
// Lacking better APIs, every write-only socket that has not yet read any data is assumed to be in a pending connection attempt state.
// @link https://docs.microsoft.com/de-de/windows/win32/api/winsock2/nf-winsock2-select
$except = null;
if (\DIRECTORY_SEPARATOR === '\\') {
$except = array();
foreach ($write as $key => $socket) {
if (!isset($read[$key]) && @\ftell($socket) === 0) {
$except[$key] = $socket;
}
}
}
/** @var ?callable $previous */
$previous = \set_error_handler(function ($errno, $errstr) use (&$previous) {
// suppress warnings that occur when `stream_select()` is interrupted by a signal
// PHP defines `EINTR` through `ext-sockets` or `ext-pcntl`, otherwise use common default (Linux & Mac)
$eintr = \defined('SOCKET_EINTR') ? \SOCKET_EINTR : (\defined('PCNTL_EINTR') ? \PCNTL_EINTR : 4);
if ($errno === \E_WARNING && \strpos($errstr, '[' . $eintr .']: ') !== false) {
return;
}
// forward any other error to registered error handler or print warning
return ($previous !== null) ? \call_user_func_array($previous, \func_get_args()) : false;
});
try {
$ret = \stream_select($read, $write, $except, $timeout === null ? null : 0, $timeout);
\restore_error_handler();
} catch (\Throwable $e) { // @codeCoverageIgnoreStart
\restore_error_handler();
throw $e;
} catch (\Exception $e) {
\restore_error_handler();
throw $e;
} // @codeCoverageIgnoreEnd
if ($except) {
$write = \array_merge($write, $except);
}
return $ret;
}
if ($timeout > 0) {
\usleep($timeout);
} elseif ($timeout === null) {
// wait forever (we only reach this if we're only awaiting signals)
// this may be interrupted and return earlier when a signal is received
\sleep(PHP_INT_MAX);
}
return 0;
}
}